Dell PowerConnect 8024 - Ipv6 Pimsm Dr-Priority; Ipv6 Pimsm Hello-Interval

644 IPv6 Multicast Commands
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm bsr-candidate vlan 9 10 34
ipv6 pimsm dr-priority
Use the ipv6 pimsm dr-priority command to set the priority value for which a router is elected
as the designated router (DR). Use the "no" form of this command to set the priority to the
default.
Syntax
ipv6 pimsm dr-priority priority
no ipv6 pimsm dr-priority
• priority —The election priority (Range: 0–2147483647).
Default Configuration
The default election priority is 1.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm dr-priority 10
ipv6 pimsm hello-interval
Use the ipv6 pimsm hello-interval command to configure the PIM-SM Hello Interval for the
specified interface. Use the "no" form of this command to set the hello interval to the default.
Syntax
ipv6 pimsm hello-interval interval