Clock Commands 913
Time source is SNTP
When SNTP client Admin Mode is disabled and Real Time Clock is
enabled, the command displays Local as shown in the following
example:
console# show clock
04:49:00 (UTC+0:00) May 9 2005
Time source is local.
The following example shows the time, date, timezone, and summertime configuration.
console# show clock detail
15:29:03 PDT(UTC-7) Jun 17 2005
Time source is SNTP
Time zone:
Acronym is PST
Offset is UTC-7
Summertime:
Acronym is PDT
Recurring every year.
Begins at first Sunday of April at 2:00.
Ends at last Sunday of October at 2:00.
Offset is 60 minutes.
show sntp configuration
Use the show sntp configuration command in Privileged EXEC mode to show the configuration
of the Simple Network Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
