Dell PowerConnect 8024 - Show Dot1 X Statistics

542 802.1X Commands
MAB mode (operational)......................... Enabled
Logical Supplicant AuthPAE Backend VLAN Username Filter
Port MAC-Address State State Id Id
------- ----------------- ------------ ----------- ----- -------- --------
64 0012.43D1.D19F Authenticated Idle 1
The following example shows port-based or auto Admin Mode and therefore does not list the
supplicants which were shown in the previous example.
console#show dot1x ethernet 1/g1
Administrative Mode............... Disabled
Port Admin Oper Reauth Reauth
Mode Mode Control Period
------- ------------------ ------------ -------- ----------
1/g1 auto Authorized FALSE 3600
Quiet Period................................... 60
Transmit Period................................ 30
Maximum Requests............................... 2
Max Users...................................... 16
VLAN Assigned.................................. 10 (exampleVlanName)
Supplicant Timeout............................. 30
Server Timeout (secs).......................... 30
MAB mode (configured).......................... Disabled
MAB mode (operational)......................... Disabled
Authenticator PAE State........................ Initialize
Backend Authentication State................... Initialize
show dot1x statistics
Use the show dot1x statistics command in Privileged EXEC mode to display 802.1X statistics
for the specified interface.
Syntax
show dot1x statistics ethernet interface