802.1X Commands 543
•
interface
— Ethernet port name. The full syntax is
unit/port
.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1X statistics for the specified interface.
console#show dot1x statistics ethernet 1/g2
Port........................................... 1/g2
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Received.................... 0
EAPOL Logoff Frames Received................... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 0000.0000.0000
EAP Response/Id Frames Received................ 0
EAP Response Frames Received................... 0
EAP Request/Id Frames Transmitted.............. 0
EAP Request Frames Transmitted................. 0
Invalid EAPOL Frames Received.................. 0
EAPOL Length Error Frames Received............. 0
The following table describes the significant fields shown in the display.
Field Description
EapolFramesRx The number of valid EAPOL frames of any type that have been
received by this Authenticator.
To Next Page
Loading...
