OSPF Commands 765
Translator Stability Interval.................. 2000
Translator State............................... Disabled
show ip ospf asbr
The show ip ospf asbr command displays the internal OSPF routing table entries to
Autonomous System Boundary Routes (ASBR). This command takes no options.
Syntax
show ip ospf asbr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ip ospf asbr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
----- ---------- ---- -------- ----------- -----------
INTRA 1.1.1.1 1 0.0.0.1 10.1.12.1 vlan10
INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 vlan12
To Next Page
Loading...
