914 Clock Commands
User Guidelines
This command has no user guidelines.
Example
The following example displays the current SNTP configuration of the device.
console#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server Key Polling Priority
--------- ----------- ----------- ----------
10.27.128.21 Disabled Enabled 1
show sntp status
Use the show sntp status command in Privileged EXEC mode to show the status of the Simple
Network Time Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
