Dell PowerConnect 8024 - Captive-Portal Client Deauthenticate

894 Captive Portal Commands
Syntax
verification { guest | local | radius }
• guest—Allows access for unauthenticated users (users that do not have assigned user names
and passwords).
• local—Authenticates users against a local user database.
• radius—Authenticates users against a remote RADIUS database.
Default Configuration
The default verification mode is guest.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#verification local
Captive Portal Client Connection Commands
captive-portal client deauthenticate
Use the captive-portal client deauthenticate command to deauthenticate a specific captive
portal client.
Syntax
captive-portal client deauthenticate macaddr
• macaddr —Client MAC address.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.