Dell PowerConnect 8024 - Ipv6 Host

660 IPv6 Routing Commands
Default Configuration
Enabled is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example globally enables IPv6 forwarding.
console#configure
console(config)#ipv6 forwarding
console(config)#no ipv6 forwarding
ipv6 host
The ipv6 host command is used to define static host name-to- ipv6 address mapping in the host
cache.
Syntax
ipv6 host name ipv6-address
no ipv6 host name
• name — Host name.
•
ipv6-address — IPv6 address of the host.
Default Configuration
No IPv6 hosts are defined.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 host Dell 2001:DB8::/32