Dell PowerConnect 8024 - Show Bridge Address-Table; Show Bridge Address-Table Count

178 Address Table Commands
show bridge address-table
Use the show bridge address-table command in Privileged EXEC mode to display all entries in
the bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan ] [ethernet interface | port-channel port-channel-number ]
• vlan — Specific valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console#show bridge address-table
Aging time is 300 Sec
Vlan Mac Address Port Type
------- --------------- ----- -------------
1 0000.0001.0000 1/g1 Dynamic
1 0000.8420.5010 1/g1 Dynamic
1 0000.E26D.2C2A 1/g1 Dynamic
1 0000.E89A.596E 1/g1 Dynamic
1 0001.02F1.0B33 1/g1 Dynamic
show bridge address-table count
Use the show bridge address-table count command in Privileged EXEC mode to display the
number of addresses present in the Forwarding Database.