Dell PowerConnect 8024 - Show Snmp Groups

1022 SNMP Commands
• filtername — Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of filters with and without a filter name
specification.
console # show snmp filters
Name OID Tree Type
------------------- ----------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
user-filter2 1.3.6.1.2.1.2.2.1.*.1 Included
console # show snmp filters user-filter1
Name OID Tree Type
------------------- ----------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
show snmp groups
Use the show snmp groups command in Privileged EXEC mode to display the configuration of
groups.