802.1X Commands 537
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1X port 1/g8 status.
console#show dot1x ethernet 1/g8
Administrative Mode............... Disabled
Port Admin Oper Reauth Reauth
Mode Mode Control Period
------- ------------------ ------------ -------- ----------
1/g8 auto Authorized FALSE 3600
User Name...................................... Clark
Quiet Period................................... 60
Transmit Period................................ 30
Maximum Requests............................... 2
Max Users...................................... 16
VLAN Assigned..................................
Supplicant Timeout............................. 30
Server Timeout (secs).......................... 30
Authenticator PAE State........................ Initialize
Backend Authentication State................... Initialize
Authentication Success......................... 9
Authentication Fails........................... 1
The show dot1x output for a specified interface varies depending on the 802.1X Admin Mode of
the port and whether any supplicants are authenticated on the port. The following table
describes the significant fields shown in the display:
To Next Page
Loading...
