Dell PowerConnect 8024 - Debug Arp; Debug Auto-Voip

992 Serviceability Tracing Packet Commands
• show debugging
NOTE: Debug commands are not persistent across resets.
debug arp
Use the debug arp command to enable tracing of ARP packets. Use the “no” form of this
command to disable tracing of ARP packets.
Syntax
debug arp
no debug arp
Default Configuration
ARP packet tracing is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug arp
debug auto-voip
Use the debug auto-voip command to enable Auto VOIP debug messages. Use the optional
parameters to trace H323, SCCP, or SIP packets respectively. Use the “no” form of this
command to disable Auto VOIP debug messages.
Syntax
debug auto-voip [ H323 | SCCP | SIP ]
no debug auto-voip [ H323 | SCCP | SIP ]
Default Configuration
Auto VOIP tracing is disabled by default.
Command Mode
Privileged EXEC mode.