Dell PowerConnect 8024 - Show Ip Dvmrp Prune; Show Ip Dvmrp Route

584 DVMRP Commands
show ip dvmrp prune
Use the show ip dvmrp prune command in Privileged EXEC mode to display the table that lists
the router’s upstream prune information.
Syntax
show ip dvmrp prune
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the table that lists the router’s upstream prune information.
console(config)#show ip dvmrp prune
Expiry
Group IP Source IP Source Mask Time(secs)
-------------- -------------- -------------- --------------
show ip dvmrp route
Use the show ip dvmrp route command in Privileged EXEC mode to display the multicast
routing information for DVMRP.
Syntax
show ip dvmrp route
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode