Dell PowerConnect 8024 - Show Ip Ospf Stub Table

OSPF Commands 777
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console>show ip ospf statistics
Area 0.0.0.0: SPF algorithm executed 0 times
Delta T SPF Duration (msec) Reason
-------- ------------------- ---------------
26:01:45 0
23:15:05 0 R
23:14:22 0 R, N
23:14:12 0 R
23:10:04 0
show ip ospf stub table
Use the show ip ospf stub table command in Privileged EXEC mode to display the OSPF stub
table. The information below will only be displayed if OSPF is initialized on the switch.
Syntax
show ip ospf stub table
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.