Dell PowerConnect 8024 - Show Monitor Session

386 Port Monitor Commands
Example
The following examples shows various port monitoring configurations.
console(config)#monitor session 1 source interface 1/g8
console(config)#monitor session 1 destination interface 1/g10
console(config)#monitor session 1 mode
show monitor session
Use the show monitor session command in Privileged EXEC mode to display status of port
monitoring.
Syntax
show monitor session session-id
• session id — Session identification number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following examples shows port monitoring status.
console#show monitor session 1
Session ID Admin Mode Probe Port Mirrored Port Type
---------- ---------- ---------- ------------- -----
1 Enable 1/g10 1/g8 Rx,Tx