Dell PowerConnect 8024 - Show Ipv6 Ospf Abr; Show Ipv6 Ospf Area

812 OSPFv3 Commands
show ipv6 ospf abr
This command displays the internal OSPFv3 routes to reach Area Border Routers (ABR). This
command takes no options.
Syntax
show ipv6 ospf abr
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf abr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
---- -------- ---- -------- ----------------------- -----
INTRA 3.3.3.3 10 0.0.0.1 FE80::211:88FF:FE2A:3CB3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 FE80::210:18FF:FE82:8E1 vlan12
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display information about
the area.
Syntax
show ipv6 ospf area areaid
• areaid — Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.