Dell PowerConnect 8024 - Ip Dhcp Snooping; Ip Dhcp Snooping Binding

212 DHCP Snooping Commands
User Guidelines
There are no user guidelines for this command.
Example
console#clear ip dhcp snooping statistics
ip dhcp snooping
Use the ip dhcp snooping command to enable DHCP snooping globally or on a specific VLAN.
Use the “no” form of this command to disable DHCP snooping.
Syntax
ip dhcp snooping
no ip dhcp snooping
Default Configuration
DHCP Snooping is disabled by default.
Command Mode
Global Configuration mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping
console(config-if-vlan1,2,3)#ip dhcp snooping
ip dhcp snooping binding
Use the ip dhcp snooping binding command to configure a static DHCP Snooping binding.
Use the “no” form of this command to remove a static binding.
Syntax
ip dhcp snooping binding mac-address vlan vlan-id ip-address interface interface
no ip dhcp snooping binding mac-address