Dell PowerConnect 8024 - Show Iscsi Sessions

iSCSI Flow Acceleration Commands 333
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the iSCSI settings.
console#show iscsi
iSCSI enabled
iSCSI vpt is 5, remark
Session aging time: 10 min
Maximum number of sessions is 192
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address Name
860 Not Configured Not Configured
3260 Not Configured Not Configured
show iscsi sessions
The show iscsi sessions command displays information about the iSCSI sessions.
Syntax
show iscsi sessions [detailed]
• detailed — Displayed list is detailed when this option is used.
Default Configuration
If not specified, sessions are displayed in short mode (not detailed).
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.