Dell PowerConnect 8024 - Router Discovery Protocol Commands

Router Discovery Protocol Commands 839
52
Router Discovery Protocol Commands
This chapter explains the following commands:
•ip irdp
• ip irdp address
•ip irdp holdtime
• ip irdp maxadvertinterval
• ip irdp minadvertinterval
• ip irdp preference
• show ip irdp
ip irdp
Use the ip irdp command in Interface Configuration mode to enable Router Discovery on an
interface. Use the no form of the command to disable Router Discovery.
Syntax
ip irdp
no ip irdp
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables router discovery on the selected interface.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp