System Management Commands 1093
show system
Use the show system command in User EXEC mode command to display system information.
The command reports current and average power consumption. With average consumption,
(since date/time) of the last bootup or calculation reset is reported. The command also reports
the current fan status as Fail, Low, Medium, or High.
Syntax
show system [
unit
]
•
unit
— The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system information.
console#show system
System Description: Dell Ethernet Switch
System Up Time: 0 days, 01h:06m:44s
System Contact:
System Name:
System Location:
Burned In MAC Address: 0001.0203.0405
System Object ID: 1.3.6.1.4.1.674.10895.3023
System Model ID: PC8024
Machine Type: Powerconnect 8024
Temperature Sensors:
Unit Description Temperature Status
To Next Page
Loading...
