Dell PowerConnect 8024 - Ip Pimsm Join-Prune-Interval

712 Multicast Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ip pimsm hello-interval 60
ip pimsm join-prune-interval
The ip pimsm join-prune-interval command is used to configure the interface join/prune
interval for the PIM-SM router. Use the “no” form of this command to set the join/prune
interval to the default. This command deprecates the ip pimsm message-interval command.
Syntax
ip pimsm join-prune-interval interval
no ip pimsm join-prune-interval
• interval — The join/prune interval (Range: 0–18000 seconds).
Default Configuration
The default join/prune interval is 60 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ip pimsm join-prune-interval 125