Dell PowerConnect 8024 - Show Switch

System Management Commands 1089
Switch Type....................... 0xd8200002
Model Identifier.................. PC8024F
Switch Description................ Powerconnect 8024F
Management Preference............. 1
Expected Code Type................ 0x100b000
Supported Cards:
Slot........................... 0
Card Index (CID)............... 3
Model Identifier............... PowerConnect 8024F
The following table describes the fields in the example.
show switch
Use the show switch command in User EXEC mode to display information about all units in the
stack. Use the show switch [
unit ] command to display the information about a specific unit on
the stack.
Syntax
show switch [ unit ]
• unit — The unit number.
Default Configuration
This command has no default configuration.
Field Description
Switch Type This field displays the 32-bit numeric switch type for
the supported switch.
Model Identifier This field displays the model identifier for the
supported switch type.
Switch Description This field displays the description for the supported
switch type.