Dell PowerConnect 8024 - Show Ip Stats

628 IP Routing Commands
Syntax
show ip route summary [all]
• all — Shows the number of all routes, including best and non-best routes. To include only the
number of best routes, do not use this optional parameter.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the IP route summary.
console#show ip route summary
Connected Routes............................... 0
Static Routes.................................. 0
RIP Routes..................................... 0
OSPF Routes.................................... 0
Intra Area Routes.............................. 0
Inter Area Routes.............................. 0
External Type-1 Routes......................... 0
External Type-2 Routes......................... 0
Total routes................................... 0
show ip stats
Use the show ip stats command in User EXEC mode to display IP statistical information. Refer
to RFC 1213 for more information about the fields that are displayed.
Syntax
show ip stats