Dell PowerConnect 8024 - Mark Ip-Precedence; Match Class-Map

398 QoS Commands
User Guidelines
This command has no user guidelines.
Example
The following example displays how to mark all packets with an IP DSCP value of “cs4.”
console(config-policy-classmap)#mark ip-dscp cs4
mark ip-precedence
Use the mark ip-precedence command in Policy-Class-Map Configuration mode to mark all
packets for the associated traffic stream with the specified IP precedence value.
Syntax
mark ip-precedence prec-value
• prec-value — Specifies the IP precedence value as an integer. (Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines.
This command has no user guidelines.
Example
The following example displays
console(config)#policy-map p1 in
console(config-policy-map)#class c1
console(config-policy-classmap)#mark ip-precedence 2
console(config-policy-classmap)#
match class-map
Use the match class-map command to add to the specified class definition the set of match
conditions defined for another class. Use the no form of this command to remove from the
specified class definition the set of match conditions defined for another class.