Dell PowerConnect 8024 - No Link-Dependency Group; Add Ethernet

344 Link Dependency Commands
Example
console(config)#link-dependency group 1
console(config-linkDep-group-1)#
no link-dependency group
Use the no link-dependency group command to remove the configuration for a link-
dependency group.
Syntax
no link-dependency group GroupId
• GroupId — Link dependency group identifier. (Range: 1–16)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
No specific guidelines
Example
console(config)#no link-dependency group 1
add ethernet
Use the add ethernet command to add member Ethernet port(s) to the dependency list.
Syntax
add ethernet intf-list
• intf-list — List of Ethernet interfaces. Separate nonconsecutive ports with a comma and no
spaces. Use a hyphen to designate the range of ports. (Range: Valid Ethernet interface list or
range)
Default Configuration
This command has no default configuration.