Dell PowerConnect 8024 - Show Bridge Multicast Filtering

Address Table Commands 181
User Guidelines
A MAC address can be displayed in IP format only if it is in the range 01:00:5e:00:00:00 through
01:00:5e:7f:ff:ff.
Example
In this example, Multicast MAC address table information is displayed.
console#show bridge multicast address-table
Vlan MAC Address Type Ports
------- ------------------- ------- ------------------------------
1 0100.5E05.0505 Static
Forbidden ports for multicast addresses:
Vlan MAC Address Ports
---- ----------------------- ----------------------------------------
1 0100.5E05.0505
NOTE: A multicast MAC address maps to multiple IP addresses, as shown above.
show bridge multicast filtering
Use the show bridge multicast filtering command in Privileged EXEC mode to display the
Multicast filtering configuration.
Syntax
show bridge multicast filtering vlan-id
• vlan_id — A valid VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode