Dell PowerConnect 8024 Cli Reference Guide

OSPF Commands 769
show ip ospf database database-summary
Use the show ip ospf database database-summary command to display the number of each type
of LSA in the database for each area and for the router. The command also displays the total
number of LSAs in the database. This command has been modified.
Syntax
show ip ospf database database-summary
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Router Shows Total number of router LSAs in the OSPF link state database.
Network Shows Total number of network LSAs in the OSPF link state database.
Summary Net Shows Total number of summary network LSAs in the database.
Summary ASBR Shows Number of summary ASBR LSAs in the database.
Type-7 Ext Shows Total number of Type-7 external LSAs in the database.
Self-Originated
Type-7
Shows Total number of self originated AS external LSAs in the OSPFv3 link state
database.
Opaque Link Shows Number of opaque link LSAs in the database.
Opaque Area Shows Number of opaque area LSAs in the database.
Subtotal Shows Number of entries for the identified area.
Opaque AS Shows Number of opaque AS LSAs in the database.
Total Shows Number of entries for all areas.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries