Dell PowerConnect 8024 - Tacacs-Server Timeout

TACACS+ Commands 489
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the authentication encryption key.
console(config)#tacacs-server key dell-s
tacacs-server timeout
Use the tacacs-server timeout command in Global Configuration mode to set the interval
during which a switch waits for a server host to reply. To restore the default, use the no form of
this command.
Syntax
tacacs-server timeout [ timeout ]
no tacacs-server timeout
• timeout — The timeout value in seconds. (Range: 1–30)
Default Configuration
The default value is 5 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the timeout value as 30.
console(config)#tacacs-server timeout 30