Dell PowerConnect 8024 - Key-Generate; Location

1126 Web Server Commands
key-generate
Use the key-generate command in Crypto Certificate Generation mode to specify the key-
generate.
Syntax
key-generate [ length ]
• length — Specifies the length of the SSL RSA key. If left unspecified, this parameter defaults
to 1024. (Range: 512–2048)
Default Configuration
This command has no default configuration.
Command Mode
Crypto Certificate Generation mode
User Guidelines
This command mode is entered using the crypto certificate request command.
Example
The following example displays how to specify that you want to regenerate the SSL RSA key
1024 byes in length.
console(config-crypto-cert)#key-generate 1024
location
Use the location command in Crypto Certificate Generation or Crypto Certificate Request
mode to specify the location or city name.
Syntax
location location
• location — Specifies the location or city name. (Range: 1–64 characters)
Default Configuration
This command has no default configuration.
Command Mode
Crypto Certificate Generation or Crypto Certificate Request mode