Dell PowerConnect 8024 - Page 1090

1090 System Management Commands
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays stack status information for the switch.
console>show switch 1
Switch............................ 1
Management Status................. Management Switch
Admin Management Preference....... 4
Switch Type....................... 0x73950001
Preconfigured Model Identifier.... PC8024
Plugged-in Model Identifier....... PC8024
Switch Status..................... OK
Switch Description................ PC8024
Expected Code Type................ 0x100b000
Detected Code Version............. 3.1.0.15
Detected Code in Flash............ 3.1.0.15
Boot Code Version................. June 9 2009
Up Time........................... 1 days 0 hrs 16 mins 37 secs
The following table describes the fields in the example.
Unit Description
Switch This field displays the unit identifier assigned to the switch.
Management Status This field indicates whether the switch is the Management
Switch, a stack member, or the status is unassigned.
Admin Management Preference This field indicates the administrative management
preference value assigned to the switch. This preference
value indicates how likely the switch is to be chosen as the
Management Switch.
Switch Type This field displays the 32-bit numeric switch type.