Dell PowerConnect 8024 - Page 1023

SNMP Commands 1023
Syntax
show snmp groups [ groupname ]
• groupname — Specifies the name of the group. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of views.
console# show snmp groups
Name Security Views
Model Level Read Write Notify
----------------- ----- ------ -------- -------- ------
user-group V3 Auth-Priv Default "" ""
managers-group V3 NoAuth-priv Default Default ""
managers-group V3 NoAuth-priv Default "" ""
console# show snmp groups user-group
Name Security Views
Model Level Read Write Notify
----------------- ------ ------ -------- -------- -------
user-group V3 Auth-Priv Default "" ""
The following table contains field descriptions.
Field Description
Name Name of the group