Dell PowerConnect 8024 - Page 762

762 OSPF Commands
Example
The following example displays OSPF router information.
console#show ip ospf
Router ID...................................... 5.5.5.5
OSPF Admin Mode................................ Enable
ASBR Mode...................................... Enable
RFC 1583 Compatibility......................... Enable
ABR Status..................................... Disable
Exit Overflow Interval......................... 0
Spf Delay Time................................. 20
Spf Hold Time.................................. 30
External LSA Count............................. 0
External LSA Checksum.......................... 0
New LSAs Originated............................ 0
LSAs Received.................................. 0
External LSDB Limit............................ No Limit
Default Metric................................. Not configured
Default Route Advertise........................ Enabled
Always......................................... TRUE
Metric......................................... 100
Metric Type.................................... External Type 1
Maximum Paths.................................. 2
Redistributing.................................
Source......................................... rip
Metric......................................... 90
Metric Type.................................... 1
Tag............................................ 555
Subnets........................................ Yes
Distribute List................................ ACL2