SNMP Commands 1027
ACL Traps...................................... Disable
DVMRP Traps.................................... Disable
OSPFv2 Traps................................... Disable
PIM Traps...................................... Disable
OSPFv3 Traps................................... Disable
CP Traps....................................... Disable
console#show trapflags ospf
OSPF Traps:
errors: all..............................Disabled
authentication failure...........Enabled
bad packet.......................Enabled
config error.....................Enabled
virt authentication failure .....Disabled
virt bad packet..................Disabled
virt config error................Disabled
if-rx: if-rx-packet.....................Disabled
lsa: lsa-maxage.......................Disabled
lsa-originate....................Disabled
overflow: lsdb-overflow....................Enabled
lsdb-approaching-overflow........Enabled
retransmit: packets..........................Disabled
virt-packets.....................Disabled
rtb: rtb-entry-info...................Disabled
state-change: all..............................Disabled
if state change..................Enabled
neighbor state change............Enabled
virtif state change..............Disabled
To Next Page
Loading...
