System Management Commands 1085
Use the show stack-port diag command in Privileged EXEC mode to display front panel
stacking diagnostics for each port.
Syntax
show stack-port diag
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the front panel stacking diagnostics.
console#show stack-port diag
1/xg1:
RBYT:0 RPKT:0 TBYT:e38b50 TPKT:d1ba
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
console#show stack-port diag
1/xg2:
RBYT:0 RPKT:0 TBYT:e38b50 TPKT:d1ba
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
Legend:
RBYT : Received Bytes
RPKT : Received Packets
TBYT : Transmitted Bytes
TPKT : Transmitted Packets
RFCS : Received Frame Check Sequence Errors
RFRG : Received Fragment Errors
To Next Page
Loading...
