1110 System Management Commands
Default Configuration
The default count is 3 probes.
The default interval is 3 seconds.
The default size is 0 data bytes.
The default port is 33434.
The default initTtl is 1 hop.
The default maxTtl is 30 hops.
The default maxFail is 5 probes.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example discovers the routes that packets will actually take when traveling to the
destination specified in the command.
console#traceroute 192.168.77.171
Tracing route over a maximum of 20 hops
1 192.168.21.1 30 ms 10 ms 10 ms
2***
3***
4***
5***
To Next Page
Loading...
