Using the CLI 141
7 - 57600
8 - 115200
0 - no change
The above setting takes effect immediately
• Option to retrieve event log using XMODEM (64KB).
[Boot Menu] 3
Sending event log, start XMODEM receive.....
• Option to load new operational code using XMODEM
[Boot Menu] 4
Ready to receive the file with XMODEM/CRC....
Ready to RECEIVE File xcode.bin in binary mode
Send several Control-X characters to cancel before transfer
starts.
• Option to display Boot Image Information. Note that this option can be used to determine
which image is active and will be booted when option one is chosen.
[Boot Menu] 5
The following image is in the Flash File System:
File Name......................................image2
CRC............................................0x4a1f (18975)
Target Device..................................0x10508548
Size...........................................0x943c84
(9714820)
Number of Components...........................2
Operational Code Size..........................0x8437c0
To Next Page
Loading...
