Ethernet Configuration Commands 245
•
port-channel-number —
A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode and Privileged EXEC mode
User Guidelines
This command has no user guidelines.
The following table describes the fields shown in the display:
Field Description
InOctets Counted received octets.
InUcastPkts Counted received Unicast packets.
InMcastPkts Counted received Multicast packets.
InBcastPkts Counted received Broadcast packets.
OutOctets Counted transmitted octets.
OutUcastPkts Counted transmitted Unicast packets.
OutMcastPkts Counted transmitted Multicast packets.
OutBcastPkts Counted transmitted Broadcast packets.
Alignment Errors A count of frames received that are not an integral number of octets in
length and do not pass the FCS check.
FCS Errors Counted frames received that are an integral number of octets in length
but do not pass the FCS check.
Single Collision Frames Counted frames that are involved in a single collision, and are
subsequently transmitted successfully.
Multiple Collision Frames A count of frames that are involved in a multiple collision, and are
subsequently transmitted successfully
Deferred
Transmissions
A count of frames for which the first transmission attempt is delayed
because the medium is busy
Late Collisions Counted times that a collision is detected later than one slot time into
the transmission of a packet.
Excessive Collisions Counted frames for which transmission fails due to excessive collisions.
To Next Page
Loading...
