TACACS+ Commands 485
30
TACACS+ Commands
This chapter explains the following commands:
•key
•port
•priority
• show tacacs
• tacacs-server host
• tacacs-server key
• tacacs-server timeout
•timeout
key
Use the key command in TACACS Configuration mode to specify the authentication and
encryption key for all TACACS communications between the device and the TACACS server.
This key must match the key used on the TACACS daemon.
Syntax
key [ key-string ]
• key-string — To specify the key name. (Range: 1–128 characters)
Default Configuration
If left unspecified, the key-string parameter defaults to the global value.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies an encryption and authentication key of 12.
To Next Page
Loading...
