Dell PowerConnect 8024 - Page 64

64 Command Groups
iSCSI Flow Acceleration
LACP
Command Description Mode*
iscsi aging time Sets aging time for iSCSI sessions. GC
iscsi cos Sets the quality of service profile that will be applied to
iSCSI flows.
GC
iscsi enable Enables Global Configuration mode command globally
enables iSCSI awareness.
GC
iscsi target port Configures an iSCSI target port (optionally configures
target port address and name).
GC
show iscsi Displays the iSCSI settings. PE
show iscsi sessions Displays the iSCSI sessions. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
lacp port-priority Configures the priority value for physical ports. IC
lacp system-priority Configures the system LACP priority. GC
lacp timeout Assigns an administrative LACP timeout. IC
show lacp ethernet Displays LACP information for Ethernet ports. PE
show lacp port-channel Displays LACP information for a port-channel. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.