Dell PowerConnect 8024 - Page 66

66 Command Groups
LLDP
Command Description Mode*
clear lldp remote data Deletes all data from the remote data table. PE
clear lldp statistics Resets all LLDP statistics. PE
lldp notification Enables remote data change notifications. IC
lldp notification-interval Limits how frequently remote data change notifications are
sent.
GC
lldp receive Enables the LLDP receive capability. IC
lldp timers Sets the timing parameters for local data transmission on
ports enabled for LLDP.
GC
lldp transmit Enables the LLDP advertise capability. IC
lldp transmit-mgmt Specifies that transmission of the local system management
address information in the LLDPDUs is included.
IC
lldp transmit-tlv Specifies which optional TLVs in the 802.1AB basic
management set will be transmitted in the LLDPDUs.
IC
show lldp Displays the current LLDP configuration summary. PE
show lldp connections Displays the current LLDP remote data. PE
show lldp interface Displays the current LLDP interface state. PE
show lldp local-device Displays the LLDP local data PE
show lldp remote-device Displays the LLDP remote data PE
show lldp statistics Displays the current LLDP traffic statistics. PE
lldp med Enables/disables LLDP-MED on an interface. IC
lldp med transmit-tlv Spwcifies which optional TLVs in the LLDP MED set are
transmitted in the LLDPDUs.
IC
lldp med faststartrepeatcount Sets the value of the fast start repeat count. GC
lldp med confignotification Enables sending the topology change notifications. IC
show lldp med Displays a summary of the current LLDP MED
configuration.
PE
show lldp med interface Displays a summary of the current LLDP MED
configuration for a specific interface.
PE
show lldp med remote-device Displays the current LLDP MED remote data. PE
show lldp med local-device Displays the advertised LLDP local data. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.