IPv6 Routing Commands 685
The following information is displayed if the operational mode of the MLD interface is enabled:
Example
console#show ipv6 mld interface vlan 2
Interface...................................... vlan 2
MLD Global Admin Mode.......................... Enabled
MLD Interface Admin Mode....................... Disabled
MLD Operational Mode........................... Disabled
MLD Version.................................... 2
Query Interval (secs).......................... 100
Query Max Response Time(milli-secs) ........... 1111
Robustness..................................... 2
Startup Query Interval (secs) ................. 31
Startup Query Count............................ 2
Last Member Query Interval (milli-secs)........ 1111
Last Member Query Count........................ 2
Last Member Query
Count
This value indicates the configured number of Group-Specific Queries sent
before the router assumes that there are no local members.
Querier Status This value indicates whether the interface is a MLD querier or non-querier on
the subnet with which it is associated.
Querier Address The IP address of the MLD querier on the subnet the interface with which it is
associated.
Querier Up Time Time elapsed in seconds since the querier state has been updated.
Querier Expiry Time Time left in seconds before the Querier losses its title as querier.
Wrong Version Queries Indicates the number of queries received whose MLD version does not match
the MLD version of the interface.
Number of Joins The number of times a group membership has been added on this interface.
Number of Leaves The number of times a group membership has been removed on this interface.
Number of Groups The current number of membership entries for this interface.
To Next Page
Loading...
