Dell PowerConnect 8024 - Page 73

Command Groups 73
TACACS+
spanning-tree mst cost Configures the path cost for multiple spanning tree (MST)
calculations.
IC
spanning-tree mst port-priority Configures port priority. IC
spanning-tree mst priority Configures the switch priority for the specified spanning
tree instance.
GC
spanning-tree pathcost method Configures the spanning tree default pathcost method GC
spanning-tree portfast Enables PortFast mode. IC
spanning-tree portfast bpdufilter
default
Discards BPDUs received on spanningtree ports in portfast
mode.
GC
spanning-tree portfast default Enables Portfast mode on all ports. GC
spanning-tree port-priority Configures port priority. IC
spanning-tree priority Configures the spanning tree priority. GC
spanning-tree tcnguard Prevents a port from propagating topology change
notifications.
IC
spanning-tree transmit hold-count Set the maximum number of BPDUs that a bridge is
allowed to send within a hello time window (2 seconds).
GC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
key Specifies the authentication and encryption key for all
TACACS communications between the device and the
TACACS server.
TC
port Specifies a server port number. TC
priority Specifies the order in which servers are used. TC
show tacacs Displays TACACS+ server settings and statistics. PE
tacacs-server host Specifies a TACACS+ server host. GC
tacacs-server key Sets the authentication and encryption key for all
TACACS+ communications between the switch and the
TACACS+ daemon.
GC
tacacs-server timeout Sets the interval for which the switch waits for a server host
to reply.
GC
timeout Specifies the timeout value in seconds. TC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*