78 Command Groups
DHCP and BOOTP Relay (IPv4)
DHCPv6
Command Description Mode*
bootpdhcprelay cidridoptmode Enables the circuit ID option and remote agent ID mode
for BootP/DHCP Relay on the system.
GC
bootpdhcprelay maxhopcount Configures the maximum allowable relay agent hops for
BootP/DHCP Relay on the system.
GC
bootpdhcprelay minwaittime Configures the minimum wait time in seconds for
BootP/DHCP Relay on the system.
GC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Command Description Mode*
clear ipv6 dhcp Clears DHCPv6 statistics for all interfaces or for a specific
interface.
PE
dns-server Sets the ipv6 DNS server address which is provided to a
DHCPv6 client by the DHCPv6 server.
v6DP
domain-name Sets the DNS domain name which is provided to a
DHCPv6 client by the DHCPv6 server.
v6DP
ipv6 dhcp pool Enters IPv6 DHCP Pool Configuration mode. GC
ipv6 dhcp relay Configures an interface for DHCPv6 relay functionality. IC
ipv6 dhcp relay-agent-info-opt Configures a number to represent the DHCPv6 Relay Agent
Information Option.
GC
ipv6 dhcp relay-agent-info-remote-
id-subopt
Configures a number to represent the DHCPv6 the
“remote-id” sub-option.
GC
ipv6 dhcp server Configures DHCPv6 server functionality on an interface. IC
prefix-delegation Defines Multiple IPv6 prefixes within a pool for distributing
to specific DHCPv6 Prefix delegation clients.
v6DP
service dhcpv6 Enables DHCPv6 configuration on the router. GC
show ipv6 dhcp Displays the DHCPv6 server name and status. PE
show ipv6 dhcp binding Displays the configured DHCP pool. PE
show ipv6 dhcp interface Displays DHCPv6 information for all relevant interfaces or
a specified interface.
UE
show ipv6 dhcp pool Displays the configured DHCP pool. PE
show ipv6 dhcp statistics Displays the DHCPv6 server name and status. UE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
To Next Page
Loading...
