Dell PowerConnect 8024 - Page 938

938 Configuration and Image File Commands
Syntax
show running-config [ all | scriptname ]
•
all -—To display or capture the commands with settings and configuration that are equal
to the default value, include the
all option.
•
scriptname -—If the optional scriptname is provided, the output is redirected to a script
file.
NOTE: If you issue the show running-config command from a serial connection, access to the switch
through remote connections (such as Telnet) is suspended while the output is being generated and
displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.