986 RMON Commands
The following example displays RMON Ethernet Statistics history for "other" on index number
1.
console> show rmon history 1 other
Sample Set: 1 Owner: Me
Interface: 1/g1 Interval: 1800
Requested samples: 50 Granted samples: 50
Maximum table size: 270
Time Dropped Collisions
------------------- ----------- -----------
10-Mar-2005 22:06:00 3 0
10-Mar-2005 22:06:20 3 0
The following table describes the significant fields shown in the display:
Field Description
Time Date and Time the entry is recorded.
Octets The total number of octets of data (including those in bad packets) received on the
network (excluding framing bits but including FCS octets).
Packets The number of packets (including bad packets) received during this sampling interval.
Broadcast The number of good packets received during this sampling interval that were directed to
the Broadcast address.
Multicast The number of good packets received during this sampling interval that were directed to
a Multicast address. This number does not include packets addressed to the Broadcast
address.
% The best estimate of the mean physical layer network utilization on this interface during
this sampling interval, in hundredths of a percent.
CRC Align The number of packets received during this sampling interval that had a length
(excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive,
but had either a bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Undersize The number of packets received during this sampling interval that were less than 64
octets long (excluding framing bits but including FCS octets) and were otherwise well
formed.
Oversize The number of packets received during this sampling interval that were longer than 1518
octets (excluding framing bits but including FCS octets) but were otherwise well formed.
To Next Page
Loading...
