Send documentation comments to mdsfeedback-doc@cisco.com
2-31
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 2 Installing Cisco MDS NX-OS and Fabric Manager
Installing the Management Software
Figure 2-9 User Options Dialog Box
Step 13 Enter a user name and password and click Next.
You see the Authentication Options dialog box shown in Figure 2-10.
Figure 2-10 Authentication Options Dialog Box
Step 14 Choose an authentication mode (Local, RADIUS, TACACS or MDS) and click Next.
Note When the MDS radio button is selected, the FM authentication uses the user database in the
switch for authentication.
To Next Page
Loading...
Need help?
General
