Send documentation comments to mdsfeedback-doc@cisco.com
2-32
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 2 Installing Cisco MDS NX-OS and Fabric Manager
Installing the Management Software
Step 15 Click Verify to test your login.
You see the Configuration Options dialog box for Fabric Manager Standalone shown in Figure 2-11.
Figure 2-11 Configuration Options Dialog Box for Fabric Manager Standalone
Step 16 Check the FC Alias and SNMPv3 check boxes as desired and click Install if you are installing Fabric
Manager Standalone.
You see the Configuration Options dialog box for Fabric Manager Server shown in Figure 2-12.
Figure 2-12 Configuration Options Dialog Box for Fabric Manager Server
To Next Page
Loading...
Need help?
General
