Send documentation comments to mdsfeedback-doc@cisco.com
15-10
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 15 Software Images
Using the Software Install Wizard
You see the Start Install dialog box shown in Figure 15-6.
Figure 15-6 Start Install Dialog Box
Note There is no limit on the number of switches you can upgrade. However, the upgrade is a serial
process; that is, only a single switch is upgraded at a time.
Step 8 (Optional) Check the Ignore version check results check box to bypass a version check.
Step 9 (Optional) Check the Ignore Actual Install and only do Version Check check box to perform a version
check.
You see the Version Check Results dialog box shown in Figure 15-7
To Next Page
Loading...
Need help?
General
