Cisco ONS 15454 Series - Page 841

Index
IN-13
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
ML-Series Ethernet cards
compatible SFPs
21-25
Ether ports PM parameters 20-10
install 2-10
IOS command line interface A-7
path trace capability 19-47
POS ports PM parameters 20-11
provision a VCAT circuit 6-86, 6-90
route fiber 2-17
slot compatibility with XC10G cards 2-5
slot compatibility with XCVT cards 2-3
module see card
monitor circuits
9-5
monitoring, performance see performance monitoring
mounting brackets
17-2
MU_LAW 17-85
multiple drops see circuits
N
NE defaults seeNetwork Element Defaults
Netscape Navigator
disable proxy service
17-66
log in 17-67
required version 3-2
test connection during Solaris setup 17-64
network element defaults
edit
15-35
export 15-38
import 15-36
restore 19-25, 19-27
networks
default configuration see path protection
linear ADM see linear ADM
point-to-point see point-to-point
BLSR see BLSR
building circuits
6-1, 9-1
convert 13-1
modify CTC network access 10-2
set up CTC network access 4-7
verify network turn up 6-4
network time protocol 4-5
network view
add nodes to map see domains
apply a custom background image (map)
19-52
change the background color 18-18
change the default network map 22-25
check network for alarms and conditions 19-63
create a universal network map 5-40
customize 10-3
delete users 18-27
DWDM A-8
switch between TDM and DWDM network views 21-27
tasks A-10
TDM A-8
node
add to current session
17-70
change node access 22-4
change node management information 10-2
change node name 18-16
date, time, and contact information 4-4
delete from current session 20-30, 20-56
icons A-3
IP address repair 20-23
remove power 16-1
non-ONS nodes see foreign node settings
NTP server
4-5
O
OC-N cards
install cards
2-6
attenuation 2-15
change 19-29
change line and threshold settings 11-2
change line transmission settings 18-49
change port to SDH 18-53
change thresholds 18-51