Cisco Sx350

52
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1027
Router Resources Commands
52.0
52.1 system router resources
To configure the system router resources, use the system router resources
command in Global Configuration mode. To return to the default, use the no form of
this command.
Syntax
system router resources [ip-entries
max-number ] [ipv6-entries max-number]
[ipm-entries max-number] [ipmv6-entries max-number]
[policy-ip-entries
max-number]
[policy-ipv6-entries max-number]
no system router resources
Parameters
• ip-entries max-number —(Optional) The maximum number of IPv4 entries.
• ipv6-entries max-number —(Optional) The maximum number of IPv6 entries.
• ipm-entries max-number —(Optional) The maximum number of IPv4
multicast entries.
• ipmv6-entries max-number —(Optional) The maximum number of IPv6
multicast entries.
• policy-ip-entries max-number —(Optional) The maximum number of IPv4
policy routing entries.
• policy-ip-entries max-number —(Optional) The maximum number of IPv6
policy routing entries.
Default Configuration
• ip-entries— 320.
• ipv6-entries— 320.
• ipm-entries— 128.